The newly designed Hound Heater Dog House Furnace now features an incredibly long life, easily replaceable heating element. A 100,000 cycle life thermostat and an internal and external heat shield for incredible safety and efficiency. You simply set it and forget it! Dimensions: 10.5"(h) X 10"(w) X 4.5"(d). Want to know the exact temperature in your pet's house? Purchase one of my indoor/outdoor thermometers. One "AAA" battery will operate the thermometer for a very long time and give you the peace of mind knowing just how warm your pet is in their dog house.
Please note that this version is the standard 110-volt version. European customers will need to purchase the 220-volt version.
Shipping to Alaska,Hawaii,Puerto Rico, or Foreign Countries Extra.
Dimensions: approx. 10"L x 10"W x 5 1/4"D
Features:
7 foot cold weather rated cord for flexibility and easier installation
Low-Medium-High thermostat settings range from approx. 32-104 degrees F
Safe, dry heat
Long life replaceable heating element (rated at 100,000 on/off cycles)
Heats up to 32-40 cubic foot houses
Cool to the touch except on top
Automatic safety shut off prevents overheating
Heat shield deflector for safer operation
150 watts of power for the largest houses and extremely cold weather (draws 1.3 amps)
Rounded corners for your pet's safety
1 year warranty from Akoma Dog Products
Average Temperature Ranges:
Low to Medium -- 32-50 degrees F
Medium to High -- 50-80 degrees F
Most people set their Hound Heater Furnace slightly above Medium. Please remember that the size of your dog house, its level of insulation, and door greatly affect the Furnace's ability to reach any of these temperatures.
Installation Instructions:
Tools Required: You will need a measuring device, drill, 1 1/8" wood bit, screw driver and six wood screws (not included).
Step 1 -- Tape the Hound Heater mounting template in any corner of the dog house. We suggest mounting it away from the entrance.
Step 2 -- Place the bit in the center of the template's black circle.
Step 3 -- Drill a hole all the way through the wall.
Step 4 -- Carefully feed the cord all the way through the previously drilled hole making sure the cord is not kinked.
Step 5 -- Mount the Hound Heater in an upright position using four sturdy wood screws. The "C" on "Caution Hot" is the top of the unit.
Step 6 -- Mount the Hound Heater Heat Shield about 2 inches above the top of the Hound Heater. The purpose of the shield is to deflect the rising heat and disperse it more efficiently in your pet's house. It will also protect the ceiling from getting too warm.
Step 7 -- Set the thermostat to the desired temperature for your pet. (Medium setting is approximately 45-50 degrees F)
Step 8 -- Plug the unit into a GFI outlet.
NOTE -- The Hound Heater Dog House Furnace is designed for wall mounting only. Floor or ceiling mounting can result in permanent damage to your Hound Heater. For maximum effectiveness, it is important that your dog house is insulated and preferably has a door or flap.
Amount in cart: $0.00
